Setup of the Pix-Link wireless repeater is simple and easy via setup.pix-link.net. The repeater can be set up in two ways. The Pix-Link WIFI range extender boosts existing WIFI to 1200Mbps with a stable signal and 360° of coverage. Just follow the steps below. Method 1: Pix-Link Setup Via a Web Browser To use the repeater's network with your computer or mobile device, connect to the PIX-LINK-2.46/PIX-LINK-5.8G network. The factory default password is 12345678. If your computer is connected to the Internet via Ethernet, disconnect it. The default wireless name is displayed on the repeater's bottom label.Simply open up your preferred web browser and navigate to either http://192.168.7.1 or setup.pix-link.net. To proceed with login, please enter the password: admin.Select Repeater Mode from the menu.The system can detect nearby wireless networks by itself.Enter the repeater SSID and pass phrase after selecting the Home WIFI. The default repeater SSID is xxxx-2.4G-EXT. Then click Apply to finish the configuration.Please keep in mind that the pass phrase is the same as your home router password.A successful connection to your router should cause the repeater LED to turn solid on.Connect the repeater midway between your router and the area with poor Wi-Fi. Your chosen location must be within range of your router. Wait around 2 minutes for the signal LED to turn solid blue. If it does not, move the repeater…