A wireless repeater, also known as a range extender, is a device that is used to extend the range of a wireless network. The Pix-link repeater is a popular range extender that can help you improve the coverage and signal strength of your existing Wi-Fi network. In this article, we will provide you with a step-by-step guide on how to set up a Pix-link repeater.
Time needed: 5 minutes
Step-by-Step Guide for Set up Pix-link Repeater:
- Step 1:
Unbox the Pix-link repeater and connect it to a power source. Wait for the device to turn on.
- Step 2:
On your computer or mobile device, go to the Wi-Fi settings and look for the Wi-Fi network named “Pix-link”. Connect to this network.
- Step 3:
Open a web browser on your device and enter the default IP address of the Pix-link repeater (192.168.10.1) in the address bar. Press Enter.
- Step 4:
You will be directed to the login page where you need to enter the default username and password. The default username and password are both “admin”.
- Step 5:
Once you have logged in, you will see the main dashboard of the Pix-link repeater. From here, you can configure your wireless settings, network settings, and security settings.
- Step 6:
Click on the “Wireless” tab and then click on “Wireless Repeater” in the left menu.
- Step 7:
Select the Wi-Fi network that you want to extend and click “Scan”.
- Step 8:
Once the Pix-link repeater detects the Wi-Fi network, select it and enter the password for the network.
- Step 9:
Click “Save” to apply the changes.
- Step 10:
Wait for the Pix-link repeater to reboot.
- Step 11:
After the reboot, connect your device to the new Wi-Fi network created by the Pix-link repeater. The new Wi-Fi network name will be the same as the original network, but with “_EXT” added to the end.
Conclusion:
Setting up a Pix-link repeater is a simple and straightforward process. By following the steps outlined in this article, you can extend the coverage and signal strength of your existing Wi-Fi network and enjoy a better browsing and streaming experience. Remember to keep your Pix-link repeater firmware up-to-date to ensure that it works properly and has the latest security updates.
Steps to log in on Pix-link repeater
Here are the steps to log in to your Pix-link repeater:
- Connect your computer or mobile device to the Wi-Fi network of your Pix-link repeater.
- Open a web browser on your device and enter “192.168.10.1” in the address bar. This is the default IP address for most Pix-link repeaters.
- Press “Enter” to access the login page of your Pix-link repeater.
- Enter the default username and password to log in. For most Pix-link repeaters, the default username is “admin” and the default password is also “admin“. However, if you have changed these credentials, use your updated login information.
- Once you have successfully logged in, you can access the settings page of your Pix-link repeater to make any necessary changes or adjustments to your network settings.
Note: If you are unable to log in with the default credentials, you may need to reset your Pix-link repeater to its factory settings. To do this, locate the reset button on the device, press and hold it for 10 seconds, and release it. The device will reboot, and you can log in with the default username and password. However, this will erase all your previous settings, so make sure to backup your current configuration before performing a reset.
How to upgrade the firmware for Pix-link repeater?
It is important to keep your Pix-link repeater firmware up-to-date to ensure that it works properly and has the latest security updates. To upgrade the firmware for your Pix-link repeater, you can follow the instructions below:
- Step 1: Go to the Pix-link website and download the latest firmware for your repeater model.
- Step 2: Connect your computer or mobile device to the Pix-link repeater via Wi-Fi or Ethernet cable.
- Step 3: Open a web browser on your device and enter the default IP address of the Pix-link repeater (192.168.10.1) in the address bar. Press Enter.
- Step 4: You will be directed to the login page where you need to enter the default username and password. The default username and password are both “admin”.
- Step 5: Once you have logged in, go to the “System Tools” tab and click on “Firmware Upgrade” in the left menu.
- Step 6: Click on the “Choose File” button and select the firmware file that you downloaded in step 1.
- Step 7: Click on “Upgrade” to start the firmware upgrade process.
- Step 8: Wait for the firmware upgrade process to complete. This may take several minutes. Do not turn off the Pix-link repeater or disconnect it from the power source during the upgrade process.
- Step 9: Once the firmware upgrade is complete, the Pix-link repeater will automatically reboot.
- Step 10: After the reboot, log back in to the Pix-link repeater and check that the firmware version has been updated to the latest version.
By following these steps, you can upgrade the firmware for your Pix-link repeater and ensure that it is running the latest software with the latest features and security updates.
How to RESET Pix-link Extender
To reset your Pix-link repeater to its factory default settings, follow these steps:
- Locate the reset button on the device. It is usually a small hole on the back or bottom of the device.
- Insert a paperclip or pin into the reset button and hold it down for about 10 seconds.
- Release the reset button after 10 seconds, and the device will reboot automatically.
- Wait for the device to reboot and the power light to stabilize. This may take a few minutes.
- Once the device has rebooted, it will be reset to its factory default settings. You can now log in with the default username and password and configure your device as required.
Note: Resetting your Pix-link repeater to its factory default settings will erase all of your previous settings and configurations. Therefore, make sure to backup your current configuration before performing a reset, so that you can restore it later if required.
Also Read- How To Set up Netfun Wifi Extender?