MSRM US302 Extender Set up

How to set up MSRM US302 Extender

by
MSRM US302 Extender Set up

MSRM US302 Wi-Fi extender Set up involves connecting the extender to your existing wireless network to extend its range and improve its speed. To set up the extender, you’ll need to plug it in, connect your device to its Wi-Fi network, and follow the setup instructions in a web browser. With the right setup, the MSRM US302 extender can help you get rid of dead spots in your home or office and give all of your devices a better Wi-Fi experience.

Here are the general steps to set up the MSRM US302 extender:

  1. Plug the extender into a power outlet near your wireless router.
  2. Connect your computer or mobile device to the extender’s Wi-Fi network. This network should have the same name as your existing Wi-Fi network, with “_EXT” added to the end.
  3. Open a web browser and go to the extender’s setup page. This is usually located at http://192.168.10.1 or http://ap.setup.
  4. Follow the on-screen instructions to connect the extender to your existing Wi-Fi network. You may need to enter your Wi-Fi network’s name and password.
  5. Once the extender is connected to your Wi-Fi network, you can unplug it and move it to a location where you want to improve Wi-Fi coverage.
  6. Connect your devices to the extender’s Wi-Fi network and enjoy the extended coverage.

Note: These steps may vary depending on the specific model of MSRM US302 extender you have. Be sure to refer to the manufacturer’s instructions for detailed setup information.

How to RESET MSRM US302 WIFI Extender

To reset the MSRM US302 Wi-Fi extender to its default factory settings, follow these steps:

  1. Locate the reset button on the extender. It is usually a small hole labeled “Reset”.
  2. Using a paper clip or similar object, press and hold the reset button for about 10 seconds.
  3. Release the reset button when the power LED starts flashing rapidly.
  4. Wait for the extender to reboot and restore its default factory settings. This may take a few minutes.

Once the reset process is complete, you can set up the extender again from scratch, as if it were new. Note that resetting the extender will erase all previous settings and configurations, so you will need to reconfigure it with your network details and preferences.

Leave a Comment