Setup a WIFI repeater through a web interface to enhance a wireless network’s range and coverage zone. Log into myrepeater.net before configuring your repeater. After WIFI repeater login at http://myrepeater.net, you can enjoy high-speed internet across your home. Follow the basic wireless-N repeater setup instructions to complete the setup. This Article can help you set up a wireless repeater if you don’t know how. If you want to log into the wireless-n repeater, follow these steps:
Login to Wireless-N WIFI Repeater
- Open any of your Web browsers and type http://myrepeater.net into the address bar. You can also use the repeater’s IP address, which is 192.168.10.1.
- A login pop-up will appear on your screen, asking for your default username and password.
- The default username and password for the wireless-n repeater are admin.
- After entering your login information, you will be taken to the Wireless-N WIFI Repeater setup dashboard.
How to Change the Wireless-N WIFI Repeater Password
WiFi Repeater password not working? If you’ve forgotten your myrepeater.net login credentials, you can restore it. In this instance, resetting the device will restore all factory defaults. Press the reset button for 10 seconds. The repeater’s base has a reset button. You can also password-protect your Wi-Fi repeater.
- Step 1: Launch your browser and go to http://myrepeater.net.
- Step 2: Enter your repeater’s login details. Fill them out correctly and continue.
- Step 3: Go to myrepeater.net’s wireless settings page and change the wireless password.
Update Wireless-N WIFI Repeater’s Firmware
An outdated firmware version may also cause the repeater to go down. As a result, check to see if your repeater is running the most recent firmware version. Also, follow the instructions to upgrade the firmware on the repeater.
- Open a Web Browser.
- Login to http://myrepeater.net.
- Update the firmware.
- Let your repeater update its firmware.
Click here to Setup Wireless-N Repeater
