Many users want to know how to Fix Lorex Camera Night Vision when their security feed goes blurry, dark, or just stops working at night. Don’t worry—these problems are common and can be solved with clear, simple steps. Let’s get your camera working like new again!
If you need more visual help, the image above shows how to clean your camera lens to improve night vision. Always include “Fix Lorex Camera Night Vision” in your image’s alt attribute for best SEO results.
What Causes Lorex Cameras to Lose Night Vision?
Several things can interfere with night vision:
- Dirty or Blocked Lens: Dust, spider webs, or water spots prevent infrared light from working.
- Not Enough Power: Weak or unstable power can stop the IR lights from switching on.
- Nearby Lights: Bright porch or street lights can confuse your camera’s sensors.
- Wrong Camera Settings: Night vision, IR, or auto-switch could be disabled.
- Bad Positioning: Facing directly into windows or reflective surfaces can create glare.
- Firmware or Hardware Problems: Old firmware or failing IR parts affect performance.
How To Fix Lorex Camera Night Vision Issues – Step by Step
1. Clean the Lens and Infrared Sensors
Use a dry cloth to wipe your lens and sensors. Even a small smudge can make you need to fix Lorex camera night vision!
2. Check Your Power Source
Ensure power cables are firmly attached. Swap outlets or recharge batteries if needed.
3. Remove Nearby Bright Lights
Turn off or move any strong porch or street lights. This often fixes Lorex camera night vision in minutes.
4. Update Camera Settings
- Open the Lorex app or menu.
- Set Night Vision or IR LED features to “Auto” or “On.”
- Switch to black-and-white for best clarity at night.
5. Reposition Your Camera
Angle cameras away from reflective surfaces. If you need more advice, see our guide on Fixing WiFi Camera Offline Issues.
6. Update Firmware
Check for firmware updates on the Lorex website. Skip this step at your peril—firmware refreshes often fix Lorex camera night vision bugs fast!
7. Reset the Camera
As a last resort, find the reset button (usually near the base), press for 10 seconds, then re-enter your settings.
Expert Maintenance Tips
- Clean your camera every month for reliable night vision and fewer future repairs.
- Always keep firmware updated—visit Lorex Official Support for news and downloads.
- Avoid pointing cameras toward strong light sources.
FAQs
Yes, updating firmware may fix software bugs and improve infrared performance.
Contact Lorex technical support. Persistent problems may point to a faulty IR sensor or hardware.
Check for lens dirt, reposition the camera, and avoid shiny surfaces that reflect infrared light.
Regular cleaning and smart setup usually keep your Lorex night vision working all night. If doubts remain, Lorex support is there to help. Reliable night vision means safer living—so don’t wait to fix any issues!