DAP-1325 N300 D-Link Extender

DAP-1325 N300 D-Link Extender is essentially a device that enhances a vulnerable signal and increases the operational range of your Wi-Fi network. D-Link range extender helps eliminate dead zones and provide a new lease of life by disposing dead signal zones. D-Link 1325 has approaches point Mode features to utilize the extender in Access point mode.

It allows setup the exceptionally secure and robust Wi-Fi. With the brilliant signal LED’s you can locate the best area for Wi-Fi coverage. With the WPS press button, you could associate with little push of a button.

DAP-1325 N300 D-Link Extender
DAP-1325 N300 D-Link Extender

How to configured DAP-1325 N300 D-Link Extender

  • Insert the extender by plugging it into an electrical outlet.
  • Ensure your system is linked to the D-link’s Wi-Fi network.
  • Attach the Ethernet cable to connect the D-Link Extender to your computer system.
  • Just types the d-link setup address i.e. dlink ap.local type 192.168.0.50 in the URL bar.
  • Searching will begin for the listing of Wi-Fi network name. It takes a min or two depending on the number of the network accessible in your area.
  • Select the router’s Wi-Fi network you need to associate
  • Enter the password of the router to finish the d link extender setup.

Setup of DAP-1325 N300D-Link Extender via WPS method

The setup of the D-Link N300 Extender makes it simple with the WPS technique. It will take mere minutes; WPS press button gives you one -touch configuration.

  • Switch on your N300 Extender by guiding it into an electrical extension.
  • Plug-in your extender adjacent to your Wi-Fi router.
  • Press the WPS button of your router for two seconds; you will see a blinking light on it.
  • Directly push the WPS button of your extender within two min. Then you will see flickering red light on it.
  • Once the flickering light on your router and your extender stop, the WPS LED lights turns solid green. It shows that the D-link 1325 n300 extender within two min. At that point you will see a squinting red light on it.
  • Move the extender in a appropriate spot where you need to expand and boost the signal.

INSATALLATION OF N300 D-LINK EXTENDER VIA QRS MOBILE APP

As a matter of first importance, we ought to comprehend that QRS Mobile application just works with D-Link DIR series home router and DAP series extender.

Likewise, this is the most effortless approach to configure the extender on your fingertips. It makes one mesh function, according to which router and extender on your finger tips. it creates one mesh function, according to which router and extender share a single Wi-Fi name. It implies your host router’s 2.4GHz and 5GHz share the same SSID an password. Before we start the procedure, Make sure that your extender is associated with your Wi-Fi router with an active web association. The DAP-1325 N300 D-Link Extender setup is very simple with QRS app without the need for your pc.

  • Plug the N300 Extender into a wall outlet close to your main router.
  • Now, hold up till solid green LED light turns on.
  • Go to the Google play store and quest for the QRS mobile app. Install D-Link QRS mobile app.
  • Connect your device to extender default SSID network for example: – D-Link_EXT. You can found the default SSID password of your N300 Extender on your Wi-Fi configuration card.
  • Launch the QRS mobile application.
  • Scanning will begin for Wi-Fi networks around you. Select the 2.4GHz ‘Host’ network of your router.
  • Now, enter the password of the selected Wi-Fi network.
  • Follow the guidance to configure the extender associating with your host router.
  • Repeat strategy, If your router has a 5GHZ network.
  • Relocated the extender in a suitable price.

How to update the firmware of DAP 1325 N300 D-Link Extender

  • Open an internet browser on your system and type http dlinkap.local in the location field.
  • Enter the password in the field.
  • If you won’t change the password from the default setting, you should leave the field clear.
  • Go to the administration menu bar on the right corner of the screen.
  • Tap on the update structure the menu.
  • Click check for New Firmware.
  • At last, Click updates Firmware. It might take 30 minutes to download DAP-1325 Manual.

Leave a Comment